Re: Fault reported by SPS. Replace SPS
Hello MarcLaflamme,That error refers to a battery test. That test happens once a week & you will get those errors. You can’t disable the test as it is written into the Flare( firmware) of the...
View ArticleRe: Fault reported by SPS. Replace SPS
That's odd because this is the first time we've seen this email. Could you think of any reason why this might have all of a sudden started happening?
View ArticleRe: Fault reported by SPS. Replace SPS
Hello MarcLaflamme,Not sure why you are just now seeing the message. Did you make any changes to your AEH( Automated Home Email) template? If so then that might have triggered it. If you would like...
View ArticleRe: Fault reported by SPS. Replace SPS
Hi Sam, Thanks for the additional info. No we didn't change the templates. Only thing was we recently provisioned another LUN which then had a disk failure and I'm waiting on a replacement. Other than...
View ArticleRe: CX3-20 backplane cables out of sequence - office move jumbled them up!
HiOK, we'll close this off now & thank everyone for all their help. We've learnt that it doesn't matter what sequence the DAEs are connected up in so long as (i) you keep the 'in' and 'out' sockets...
View ArticleSas/Sata Hard Disk Firmware A46, where's the .iso?
I have a copy of version A43 of the Dell SAS/SATA Hard Disk firmware update utility, which was new in March of 2013, i see that A46 has just been released, but it doesn't seem to have any .iso included...
View ArticleRe: Sas/Sata Hard Disk Firmware A46, where's the .iso?
You posted in the Dell|EMC Storage forum. The Dell|EMC systems never had ISO files for drive firmware updates as far as I remember.Which model Dell|EMC SAN do you have that there is an ISO for drive...
View ArticleRe: Sas/Sata Hard Disk Firmware A46, where's the .iso?
Not a SAN in this case, just a bunch of SAS/SATA disks I have in an MD1000, attached to a PERC6/E in a PE2950.A43's EXE file had an iso included, bootable update utility, worked great! If you look at...
View ArticleHow to solve the problem MD3000i WARNING: Restart by watchdog time out
Adding 9767 symbols for standalone.Error07/30/13-12:37:53 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00 Reset, Power-Up Diagnostics - Loop 1 of 13600 Processor DRAM 01 Data lines...
View ArticleMD1200 Redundant Path Warning
Hi,One of my storage is arrays is giving me a Logical Connector (redundant path) warning. I drives are all good and firmware and drivers are up to date. Not sure what else to try.
View ArticleEvent ID VSS 8194, Windows Server 2012 Hyper-V Cluster
Hi,We have 10 blades Dell M620 in M1000e CMC, all are windows 2012 hyper-V cluster members configured with iSCSI software initiator, HITKIT 4.7.1 with latest FW and drivers to date. Windows also fully...
View ArticleRAID Battery replacement on MD3200 Disc Shelves
Hello thereI have 2 disc shelves, MD3200. I have been advised by Dell that I need to replace the RAID batteries on both units.I wondered if anyone has ever done this or are there any Dell instructions...
View ArticleDAS for R320 Server
Please advise the most efficient configuration of DELL DAS Models to achieve 32TB Storage in Raid 5. Kindly explain also on how to connect the DAS MDXXXX to R320 Server.
View ArticleClik here to view.
DCIM_FCEnumeration not returning FC Info
I have an R720 and Installed some Emulex LPe12002 and LPe15004 FC cards.Via Racadm or WSman, I am not getting any information when I run Racadm hwinventory FC or using Winrm DCIM_FCEnumeration.WINRM...
View ArticleUpgrade NX3200 operating system from Storage Server 2008 to Storage Server...
Hi All,First and foremost i am sorry if this is the wrong section as the question is around a Dell NX3200 running windows storage server 2008r2.I am managing a storage device for a client (Dell NX3200)...
View ArticleMD3000i - Degraded Physical Disk Channel
Hello,I just received an error from an MD3000i array with MD1000 enclosure. The summary is currently showing "Degraded Physical Disk Channel". All drives are online and the array is still usable....
View Articlereplaced drives, rebuild stops with "piece failed"
Hey Everyone!I have a Dell MD3000i+MD1000 that had two drive fails somewhere along the way. Both chassis are in RAID10, and I have 2 hotspares.The storage dutifully is using the hotspares, so there has...
View ArticleMD1000 'foreign disk' issue
We have an old MD1000 (out of warranty) with 15 disks, one of which is a global hot spare (disk 0), the rest forms a RAID5 volume. Each disk's size is different, but the majority (lowest common value)...
View ArticleEMC VMAX to Dell Compellent Migration Tool Suggestions
Hi,We have purchased a Compellent recently and will need to migrate data from existing VMAX to the Compellent. I am looking for suggestions on some good tools that can be used for the data migrations...
View ArticlevCenter iSCSI issues
Apologies in advance if some of this is vague. I'm new to these sorts of projects, but I can provide more details if required...We're creating a customer environment using an MD3620 array and two...
View Article