MD3000i Degraded wide port becomes failed
Hi,We have an out of warranty MD3000i that has been running fine for years, but has recently begun throwing event code 1707, 1706 and 4011 errors every few months, and leaving us with Virtual Disk Not...
View ArticlePowerVault Logs report failed RAID Module - but all appears well.
Recieved an e-mail from our PowerVault MD3220i yesterday showing the following message: Host ID: Out-of-BandEvent Error Code: 1710Event occurred: Mar 15, 2016 2:54:45 PMEvent Message: RAID Controller...
View ArticleManual for eLatitude e6410 with ssd drive
Hello all. I found a manual that I needed a couple month ago. I lost the url or the download that I did. Now I am wondering if anyone knows where I can download this manual again. It had pictures...
View ArticleWin 10 not recognizing 3 tb hard drive on OptiPlex 7010 intel rapid storage...
Win 10 not recognizing 3 tb hard drive on OptiPlex 7010 intel rapid storage utility does ??
View ArticleInstalling Windows 7 64Bit on new SSD
Hey Guys,i'm just getting a headdache. Windows installation doesn't find the installed ssd. I created a new VD in the PERC H310 menu and everything looks fine but windows setup doesn't see the device....
View ArticleRe-install MDSM for MD300
I have an MD3000 connected to a PE2950 running Unix, and the PC that had the MDSM was removed from the network and disposed of (without my knowledge...). Can I install the MDSM on a new PC (windows XP...
View ArticleNX3230 Storage mirror
HI Everyone, First of all well done, what a great forum. I currently have a system with 2 x PowerEdge R630 and 2 x NX3230 NAS servers, running windows server 2012 R2 and windows storage server...
View ArticleStorage on the C2665dnf printer
I want to dispose of my C2665dnf printer and need to know if it has storage on it that I need to worry about.
View ArticleRe: Unable to back up on Drive E
O/S MS Windows 7 C Drive 250 GBE Drive 1 TBF Drive 75 GBHi GuysI was wondering if you could help me before I head down to the local Dell service centre I use a 17 inch Alien all has been going well up...
View ArticleDR4100 set up SNMP
Greetings community,Please could someone point me in the right direction in terms of setting up SNMP on a DR4100. I downloaded the Administrators Guide and searched for SNMP in the doc, and it didnt...
View Articlemd3000i Degraded Physical Disk Channel
Hi,I have an md3000i with attached md1000. We had a HDD fail which the hot spare took over with no down time or issues.Now I replaced the failed drive and it was put back into the array. Once that...
View ArticleMonitoring Dell MD Storage (1000 and 3000),
We have 3 Dell MD Storage (1000 and 3000), is there possibility of Monitoring these storage hardware, These are directly attached to servers, No IP to it.Can Dell MD Storage can report to a central...
View ArticlePowervault 114x error code C
Morning,we have a powervault 114x that we use for backing up data, currently when i try to do a back up im getting an error code C on the tape drive. can anyone plse assist what the error means and how...
View ArticleMD-3000
Is the MD-3000, compatible with Windows server 2012?Currently its running firmware 06.70.17.60
View Articleabout Dell N4C2D 62111C1 LSI/SAS2X36 expander
hi everyonei have a dell LSI/SAS2X36 expander (see the picture i attached). i don't know how to connect power cable to the SAS expander. should i use cpu 4 pin cable to supply power?if anyone knows how...
View Articlehi everyone
hi everyonei have a dell LSI/SAS2X36 expander (see the picture i attached). i don't know how to connect power cable to the SAS expander. should i use cpu 4 pin cable to supply power?if anyone knows how...
View ArticlePERC H310 and Disk 4Kn
Hello,The PERC H310 has HD limitation 2TB (or more) 4kN?Thank you.Server Configuration: Dell T320 with PERC H310New Disk: HGST HUS726020ALN610Capacity: 2TBPerc H310 PD MGMT recognized capacity:...
View ArticleAUTOMATIC SCHEDULED BACKUP does not work (3.1)
Hello,I've set up the backup / restore settings and manual backup works perfectly. But automatic backup produces nothing. Set as enabled, AUTOMATIC SCHEDULED BACKUPEditInformationModify the backup...
View ArticleIP of SAS/iSCSI bridge
I have aquired a used SAS/iSCSI bridge. I have reset the TL2000 that it is installed in to factory config via the front panel. The bridge is not pingable on its default IP (10.10.10.10) nor any IP on...
View ArticleProblem with H700 Perc Raid Array under SBS2011
Hello after having changed a HDD due to E1810 Error the new HDD shows capacity 0GB in the OpenManage ... how to proceed ?Best regards
View Article